Description:

Construction:  All internal parts and all external non-contact parts either made of or covered with M.S. Electrically heated.

DRYING CHAMBER:

• Double Wall Construction 
• The Oven Will Be Insulated With 100 Mm Thick Glass Wool Insulation All Sides of The Dryer
• Design of Panels Will Be Such That Inner & Outer Wall Contact Minimum to Minimize Heat Losses through Conduction.
• Double Walled Door in Two Parts at Front Side Will Be Provided with Silicon Rubber Gasket, Heavy Duty Male-Female Type Hinges & Ball Catch Locking System. 
• Side Runners Will Be Provided for Resting Trays Inside the Dryer. 
• AIR RECIRCULATION. Coaxial fan driven by 0.5 HP/1440 RPM/ motor through Bearings & Belt Driven Fan 1 No for Uniform Temperature throughout the Dryer.
• HEATING: Tubular Air Heaters on Both Sides. 
• Fresh Air Inlet: Fresh Air Inlet with Filter Provided at Side of The Tray Dryer.
• SAFETY: Safety Controller Will Be Provided. If In Case Main Digital Controller Fails, Safety Controller Will Control the Set Temperature.
• Heaters & Blowers Are Interlinked. Heaters Will Not Switch on Unless Motors Are In “On” Position.
• Overload Relay Provided for Motor Starter.
• MCB Provided for Mains.
• Limit Switch Will Be Provided on Front Door, When Doors Open It Will Cuts Off Supply of Motor & Heaters.

Construction:  All internal parts and all external non-contact parts either made of or covered with M.S. Electrically heated.

DRYING CHAMBER:

• Double Wall Construction 
• The Oven Will Be Insulated With 100 Mm Thick Glass Wool Insulation All Sides of The Dryer
• Design of Panels Will Be Such That Inner & Outer Wall Contact Minimum to Minimize Heat Losses through Conduction.
• Double Walled Door in Two Parts at Front Side Will Be Provided with Silicon Rubber Gasket, Heavy Duty Male-Female Type Hinges & Ball Catch Locking System. 
• Side Runners Will Be Provided for Resting Trays Inside the Dryer. 
• AIR RECIRCULATION. Coaxial fan driven by 0.5 HP/1440 RPM/ motor through Bearings & Belt Driven Fan 1 No for Uniform Temperature throughout the Dryer.
• HEATING: Tubular Air Heaters on Both Sides. 
• Fresh Air Inlet: Fresh Air Inlet with Filter Provided at Side of The Tray Dryer.
• SAFETY: Safety Controller Will Be Provided. If In Case Main Digital Controller Fails, Safety Controller Will Control the Set Temperature.
• Heaters & Blowers Are Interlinked. Heaters Will Not Switch on Unless Motors Are In “On” Position.
• Overload Relay Provided for Motor Starter.
• MCB Provided for Mains.
• Limit Switch Will Be Provided on Front Door, When Doors Open It Will Cuts Off Supply of Motor & Heaters.

DIGITAL TIMER:

• Inbuilt Digital Timer, Range 0 To 999 Minutes with Alarm Will Be Provided with The Unit.
• Insulation Glass wool.
• M.O.C: MS Painted.
• Capacity:- Trays: – 6 nos to 192 nos.